Guide
Margalla Enclave Plot Sizes & Dimensions: 5 Marla, 10 Marla, 1 Kanal Explained
Real Estate Analyst
10 min read
Overview
Margalla Enclave Islamabad is marketed with several residential plot categories, including 5 Marla, 10 Marla and 1 Kanal. The category name helps buyers start comparing options, but it does not explain the plot’s exact shape or confirm its legal measurement. Area, frontage, depth, street position and applicable building controls all affect how a plot may be used.
For the wider project background and general society information, read the Margalla Enclave Islamabad guide. This article has a narrower purpose: to explain commonly published plot dimensions, unit conversions and the checks buyers should make before using a size label to compare properties or plan a house.
Before deciding, browse the current Margalla Enclave property listings, then match any property of interest with its sector, street, plot number and documented measurements. A listing title alone does not prove the advertised dimensions. Ask for the exact plot reference and obtain written clarification if the area and measurements do not match.
Margalla Enclave Residential Plot Sizes
The following table summarises dimensions commonly published for these plot categories. Treat the figures as a starting point for comparison, not as a substitute for the latest approved layout or the documents for a specific plot.
| Residential category | Commonly stated area | Commonly stated dimensions | Area calculated from dimensions |
|---|---|---|---|
| 5 Marla | 125 sq yd | 25 × 45 ft | 1,125 sq ft |
| 10 Marla | 250 sq yd | 35 × 65 ft | 2,275 sq ft |
| 1 Kanal | 500 sq yd | 50 × 90 ft | 4,500 sq ft |
One detail deserves special attention: 35 × 65 feet equals 2,275 square feet, while 250 square yards equals 2,250 square feet. These two figures are not mathematically identical. Do not silently assume that one is correct for every plot. Ask the relevant office to confirm the area and dimensions recorded for the exact plot before making a payment or commissioning a house design.
Understanding a 5 Marla Plot
The commonly stated 5 Marla category is 125 square yards, with dimensions of 25 feet by 45 feet. Multiplying the stated sides gives 1,125 square feet. This is the gross land area based on those dimensions; it is not the amount of covered floor area that can automatically be built.
The 25-foot side is usually described as the frontage and the 45-foot side as the depth in this dimension format. Frontage affects how the property meets the street and how a gate, entrance or driveway might be arranged. Depth influences the layout from the front to the back of the plot. The final design must still accommodate any mandatory open spaces, setbacks, parking and other applicable rules.
A 5 Marla plot may suit a buyer seeking a smaller land purchase, but suitability depends on household needs and building rules. A standard online house plan may not fit every plot because orientation, shape and required open areas can change the usable layout. Verify claims such as corner or park-facing position on the official plan.
Understanding a 10 Marla Plot
The commonly stated 10 Marla category is 250 square yards, with advertised dimensions of 35 feet by 65 feet. Multiplying those dimensions produces 2,275 square feet, which differs slightly from the 2,250 square feet represented by 250 square yards. Buyers should have this mismatch clarified in the plot-specific record rather than relying on a generic online table.
Compared with the stated 5 Marla dimensions, a 10 Marla plot has a wider frontage and greater depth. That can give a designer more options for access, room arrangement and circulation, but it does not guarantee a particular number of bedrooms, floors or covered square feet. Those outcomes depend on the exact plot and the current building rules.
For a 10 Marla listing, match the plot number, street and sector to its documents. Ask whether the frontage and depth are officially recorded or copied from a general advertisement. Get written clarification about any mismatch before paying a token or approving drawings.
Understanding a 1 Kanal Plot
The commonly published 1 Kanal category is 500 square yards, with dimensions of 50 feet by 90 feet. Multiplying the stated frontage and depth gives 4,500 square feet. That is four times the area calculated from the stated 5 Marla dimensions and twice the area calculated from the stated 10 Marla dimensions.
A wider frontage may allow more flexibility for entrances and the overall arrangement of a house, while additional depth can offer options for separating front-facing and private areas. These are possibilities, not promises. Actual design choices depend on plot orientation, level, shape, location and mandatory open spaces.
A 1 Kanal label does not establish how many floors may be built or how much covered area will be approved. A larger plot may also bring higher construction, landscaping and maintenance costs. Verify claims about corner, park-facing, boulevard-facing or extra land against the current plan and the documents for the exact plot. A qualified architect should work from verified dimensions, not an assumed standard.
Why Frontage and Depth Matter
Total area indicates how much land a plot contains, while frontage and depth describe its shape. This difference matters when comparing listings or planning a home. A narrow, deep plot may require a different layout from a wider plot with less depth, even where the overall areas are similar.
Frontage affects the space available for a gate, entrance and driveway, as well as the width of the front elevation. Depth affects how rooms and circulation may be arranged from front to back. The practical outcome also depends on daylight, ventilation, access, neighbouring buildings and any required setbacks.
Check orientation and street position separately. A corner plot may face more than one road, while a park- or boulevard-facing claim should be verified on the approved layout and, where practical, at the site. Give the architect verified dimensions, orientation and applicable rules; a plan labelled for the same Marla category may still not fit.
Square Yards, Square Feet and Marla
Property advertisements may use Marla and Kanal, project schedules may use square yards, and layout drawings may show measurements in feet. These units are related, but buyers should not treat every advertised conversion as proof of the legal area. Local records and scheme-specific conventions can differ, and dimensions may be rounded in marketing material.
| Common category | Square yards commonly stated | Square feet from listed dimensions |
|---|---|---|
| 5 Marla | 125 | 1,125 |
| 10 Marla | 250 | 2,275 |
| 1 Kanal | 500 | 4,500 |
The 10 Marla row shows why unit-based area and frontage/depth calculations must be compared. Milkiyat’s area unit converter can help with arithmetic, but only the official plot documents can clarify a plot-specific discrepancy.
How to Verify Dimensions Before Buying
Confirm measurements before paying a token, signing an agreement or commissioning a design. Use this checklist to keep the process practical and consistent.
| Check | What to confirm | Why it matters |
|---|---|---|
| Plot reference | Sector, street and exact plot number | Connects the advertisement to the correct property |
| Allotment or intimation document | Plot category and reference details | Helps identify inconsistencies in the seller’s description |
| Current layout | Plot position and relationship to streets or open areas | A general master plan may not show every plot measurement clearly |
| Area mismatch | Written explanation if area, frontage or depth differs | Avoids choosing a figure based on assumption |
| Site visit | Access, road level, visible boundaries and nearby development | Provides context but does not replace official measurement |
| Design preparation | Verified dimensions and current rules reviewed by a qualified professional | Reduces the risk of designing from incorrect measurements |
The official Capital Development Authority website is a starting point for planning information. For plot-specific questions, contact the responsible office through independently verified official channels and retain written responses. Do not rely solely on screenshots, dealer pins or verbal assurances.
Plot Size and the Construction Budget
Land area is only one part of a house-building budget. Costs also depend on the permitted covered area, number of floors, structural design, materials, labour, finishes, utility connections and site conditions. Two buyers with plots of the same category can have different budgets because their designs and specifications differ.
First, confirm the construction rules for the exact plot. Then decide what rooms and facilities are needed, ask a qualified professional to prepare a suitable design, and obtain an itemised estimate. Include approvals, site preparation, boundary walls, utility work and a contingency instead of calculating only the main structure.
Do not estimate the covered area by multiplying the plot area by the number of floors. Each floor’s permitted coverage and layout may differ, and setbacks or open areas may be mandatory. A realistic estimate requires verified measurements and a design that complies with the applicable requirements.
Comparing Plots and Completed Houses
This guide focuses on plot dimensions, not current market prices. Asking prices can change with ballot round, payment stage, location, plot position, remaining dues and seller terms. Compare listings only when the category and total price are clearly stated, and check what is included in the amount quoted.
| Choice | What to review | Main considerations |
|---|---|---|
| Buy a plot | Current plot listings and plot-specific records | Size, location, dues, development status and construction timeline |
| Buy a completed house | House listings and property documents | Asking price, condition, documentation, readiness and likely repair costs |
For a wider search, browse Islamabad property listings or houses for sale in Islamabad. For the dedicated comparison of ballot rates and resale asking prices, read the Margalla Enclave plot price tracker: ballot vs resale. This keeps the present guide focused on measurement rather than repeating price analysis.
Frequently Asked Questions
What are the dimensions of a 5 Marla plot in Margalla Enclave?
Commonly published dimensions are 25 × 45 feet, or 125 square yards and 1,125 square feet. Confirm the measurements for the specific plot in its documents.
What are the dimensions of a 10 Marla plot in Margalla Enclave?
Commonly published dimensions are 35 × 65 feet. These sides calculate to 2,275 square feet, while 250 square yards equals 2,250 square feet. Ask the relevant office to confirm the exact recorded area and dimensions.
What are the dimensions of a 1 Kanal plot in Margalla Enclave?
Commonly published dimensions are 50 × 90 feet, equivalent to 4,500 square feet by multiplication and 500 square yards by the stated category. Verify the plot-specific record.
Does plot size determine the covered area of a house?
No. Permitted coverage depends on the current rules, plot shape and approved design. The land area alone does not establish the number of floors or rooms allowed.
Can I use a standard house plan for any plot of the same size?
Not without checking it. Frontage, depth, orientation, street position and required open areas can differ. Ask an architect to adapt the design to verified measurements and current rules.
Do dimensions confirm that a plot is ready for construction?
No. Measurements do not confirm ownership, possession, utilities, development completion or building approval. Verify those matters separately for the specific property.
Disclaimer
This guide is for general educational purposes and is not a substitute for official property records, a site survey, legal advice or architectural advice. The plot categories and dimensions reflect commonly published information and must be checked against the current approved layout and the documents for the specific property. Verify plot number, sector, area, frontage, depth, allotment status, dues, possession and applicable construction rules through responsible official channels before making a payment or starting design work.